A typical GD Mod

Latest project. As these pics were taken, the spine was .212" and the hypotenuse was .742" for a bevel angle of 16.43 degrees. I will lose a little when I set the bevel so I am going down to .205" on the spine and I want to make it still more hollow. The camera doesn't want to focus on the end of the blade... too skinny. So I couldn't get an end-on shot. The lower half of the blade disappears. I will do a vid when I am done with the coarse sanding and final profiling. Its really the only way to see it.

Here the sanding and profiling are nearly done.

Trying on some special scales.

Discussion Forums

And now a word from our sponsor. Get your Shave Ready Gold Dollar Razor at:


This Site is Under Construction.


Check back every few weeks for updates.


copyright 2020